Our home. Your engineering team.
Complex cast surfaces, freeform geometry and missing CAD need a considered capture method. Our Peterborough team uses scanning to support reverse engineering, then turns the useful geometry into a manufacturing brief.
Engineer made quote in 24 hours
Start with a worn, failed or discontinued part. We reconstruct the design and agree improvements before manufacture.
Digital surface capture to support CAD reconstruction and the wider reverse engineering job.
Machine angled features and complex surfaces, with the set-up planned around the critical relationships.
Milled housings, brackets and precision components in metals and engineering plastics.
Stepped shafts, threaded fittings and housings, made to drawing or reverse engineered from a sample.
Bring us the application. Our engineers recommend the material and approach for your prototype or part.
Brackets, panels and enclosures, developed around the bends, interfaces and finished assembly.
Moulded plastic components, with material, tool design and production requirements considered together.
Small, complex metal components where geometry and quantity suit moulding and sintering.
Aluminium housings and components, with casting geometry and any secondary machining planned together.
Custom sections developed for the application, then cut, machined and finished as required.
Manufactured and bought-in components brought together, with the interfaces and checks agreed first.
Welded components and fabrications, planned around material, joint access and distortion control.
Peterborough · Engineering support
Bring your component to our Peterborough team by arrangement. We review its size, surface condition and accessible features before choosing a capture approach. The purpose of the scan matters: a visual reference, a fit check and a replacement design need different levels of engineering work.
Surface data is one input to reverse engineering. We still need to establish the material, working clearances and any geometry lost through wear, then agree the CAD and drawing deliverables with you.
Reverse Engineering in Peterborough →A generic job shop makes what is on the drawing. An overseas quote looks cheap until you count the lead time, the freight and the cost of a part that comes back not quite right. MV is built for the harder problem: no drawing, a part that has failed for a reason no one has diagnosed, and a machine that cannot wait.
We measure the part itself and diagnose why it failed, then improve the design where the original was the weak point.
You deal directly with our engineering team, with one point of contact to keep the work clear and coordinated.
Our engineers choose the manufacturing route around the geometry, material, quantity and working requirements of your part.
One engineering team takes your part from the moment it lands with us to the moment it ships. You deal with the people doing the work, not a sales desk, and reverse engineering sits at the centre of every step.
Send the part, a sample or a drawing. Even a photograph and a note on what failed gives us enough to start. No drawings or CAD, no problem, the part is the brief.
We measure it precisely and rebuild it in CAD, check the material, then work out why it failed and where the original design can be improved.
We machine, mould, cast or fabricate to the corrected spec, choosing the right process for the part and inspecting it as we go.
A finished, inspected part arrives ready to fit, on time or early, with the measurements and documentation to back it up.
Most parts that come through MV start as a problem rather than a drawing. We take the work from first measurement to finished, inspected component, and we choose the process to suit the part rather than forcing the part to suit one machine. Reverse engineering leads everything we do. The rest of our capabilities exist to make whatever that work demands.
Start with a worn, failed or discontinued part. We reconstruct the design and agree improvements before manufacture.
Explore Reverse Engineering →Digital surface capture to support CAD reconstruction and the wider reverse engineering job.
Explore 3D Scanning →Machine angled features and complex surfaces, with the set-up planned around the critical relationships.
Explore 5-Axis CNC Machining →Milled housings, brackets and precision components in metals and engineering plastics.
Explore CNC Milling →Stepped shafts, threaded fittings and housings, made to drawing or reverse engineered from a sample.
Explore CNC Turning →Bring us the application. Our engineers recommend the material and approach for your prototype or part.
Explore 3D Printing →Brackets, panels and enclosures, developed around the bends, interfaces and finished assembly.
Explore Sheet Metal →Moulded plastic components, with material, tool design and production requirements considered together.
Explore Plastic Injection Moulding →Small, complex metal components where geometry and quantity suit moulding and sintering.
Explore Metal Injection Moulding →Aluminium housings and components, with casting geometry and any secondary machining planned together.
Explore Aluminium Die Casting →Custom sections developed for the application, then cut, machined and finished as required.
Explore Aluminium Extrusions →Manufactured and bought-in components brought together, with the interfaces and checks agreed first.
Explore Assembly →Welded components and fabrications, planned around material, joint access and distortion control.
Explore Welding →Getting the part made is one thing. What brings engineers back is how the part performs, where it is made and whether it arrives when we said it would.
Where the original carried a weak point, we design it out. The replacement is built to run longer than the original.
UK-based, so lead times, communication and accountability stay close to home.
Over 100,000 parts delivered, on time or early every time, an average of 1.5 days ahead.
Practical answers
Have a part in mind? Speak directly with our engineering team.
Ask an engineer →MV Manufacturing Solutions is based at Unit 3, Belgic Square, Padholme Rd E, Peterborough PE1 5XF. Contact the team before travelling so we can agree how to receive your part and what information to bring.
A scan records surface geometry. It does not automatically establish design intent, fits, material or the original unworn dimensions. CAD reconstruction and engineering review turn useful scan data into a model and drawing suitable for the agreed next step.
Send clear photographs, the quantity required, your preferred delivery date and a short explanation of the application. Include any CAD files, drawings, part numbers or surviving specifications. If the part has failed, describe what happened and whether you have a mating component available.
Contact us before sending a physical part. We will confirm the receiving details and discuss suitable handling for its size and condition. Include your contact details and a reference to the enquiry. Large, fragile or unusually heavy components need arrangements agreed individually.
We can review opportunities to improve material, geometry or manufacture as part of the engineering work. A change must be considered against fit, function and the wider assembly. We agree the proposed specification with you before making a replacement, rather than silently changing the original design.
If a production machine is waiting on an obsolete shaft or housing, start with photographs and a description of the failure. We establish what can be recovered from the sample and what must be checked against its mating parts. Add photographs that show the part in context, together with any known dimensions, operating conditions and restrictions on the replacement.
Surface reflectivity, colour, access and part condition can affect the capture method. Send photographs and the approximate size before arranging a sample. We will discuss any preparation and identify surfaces or hidden features that need another approach.
We review both individual replacement parts and requirements for repeat manufacture. The cost and suitable process depend on the work involved. A first article or prototype may be useful before a larger order, with the approval criteria agreed in advance.
We confirm timing for the specific job after reviewing the sample or design, material availability, manufacturing route and inspection requirements. Tell us about a shutdown or required installation date at enquiry stage. Transport arrangements and any staged deliveries are agreed as part of the job.
Specify the critical dimensions, material records and inspection information you require when asking for a quote. We agree which checks and documents form part of the order. Where the work needs a particular standard or certification, that requirement must be reviewed before acceptance.
Start with the part
A photograph, a drawing or the part itself gives us a place to start.
