You do not need a finished CAD model or a full drawing pack to get a price from us. Send us the part itself, any drawing you have, or just a description of what failed and what it has to do. An engineer will review it and come back with a quote within 24 hours. If there is no drawing, reverse engineering it is part of what we do.
Start with a worn, failed or discontinued part. We reconstruct the design and agree improvements before manufacture.
Digital surface capture to support CAD reconstruction and the wider reverse engineering job.
Machine angled features and complex surfaces, with the set-up planned around the critical relationships.
Milled housings, brackets and precision components in metals and engineering plastics.
Stepped shafts, threaded fittings and housings, made to drawing or reverse engineered from a sample.
Bring us the application. Our engineers recommend the material and approach for your prototype or part.
Brackets, panels and enclosures, developed around the bends, interfaces and finished assembly.
Moulded plastic components, with material, tool design and production requirements considered together.
Small, complex metal components where geometry and quantity suit moulding and sintering.
Aluminium housings and components, with casting geometry and any secondary machining planned together.
Custom sections developed for the application, then cut, machined and finished as required.
Manufactured and bought-in components brought together, with the interfaces and checks agreed first.
Welded components and fabrications, planned around material, joint access and distortion control.
Send the part, a drawing or a short description of what it has to do. An engineer reads every enquiry, and where we are working from a worn original we look at how to make it better than the original. You get a firm, engineer-made quote within 24 hours.
Prefer to talk it through first? Call or email and an engineer will pick it up. However you reach us, with a part, a drawing or a quick description of the problem, we quote within 24 hours and deliver on time or early, every time.
The physical component, worn or failed, is the best starting point. If you can send it, we can measure it. Send the part, a sample or a drawing. Even a photograph and a note on what failed gives us enough to start. No drawings or CAD, no problem, the part is the brief.
We measure it precisely and rebuild it in CAD, check the material, then work out why it failed and where the original design can be improved.
Material, if you know it. The material or grade the part is made from, or what it has to withstand. If you are not sure, that is part of the conversation.
A finished, inspected part arrives ready to fit, on time or early, with the measurements and documentation to back it up.
